Sump Pump Installation Services in Toronto

A sump pump is a mechanical device that removes excess water from a sump pit located in the basement.The pump activates automatically when groundwater or internal drainage fills the pit to a set level.Water is discharged through a dedicated pipe routed away from the home’s foundation.This system prevents water from accumulating beneath finished floors or behind basement walls.

In Toronto, sump pumps are critical for properties affected by high water tables or heavy rainfall.

What Is a Sump Pump and How Does It Work?

‍

A sump pump is a mechanical unit installed in a sump pit below your basement floor to evacuate rising groundwater.

At Aquaboss, we install sump pumps as part of fully sealed drainage systems designed to protect homes in Toronto from basement flooding. Each unit is triggered by a float switch that responds when water in the pit reaches a set level. The pump activates automatically and discharges the water through a dedicated drain pipe routed safely away from your home’s foundation.
We integrate a check valve to prevent water from flowing back into the system after shutdown. The entire assembly is built with basement layout, pit depth, and soil saturation in mind. For finished basements or flood-prone areas, we offer submersible pumps with optional battery backup or water-powered failsafe units.

These systems are commonly integrated into full basement waterproofing services in Toronto, especially in homes prone to hydrostatic pressure or soil saturation.

Sump Pump Installation Process

‍

Aquaboss installs sump pump systems using a structured process that ensures proper placement, electrical safety, and long-term drainage performance. Every step is tailored to the layout and conditions of your home in Toronto.

Step 1: Site Evaluation & Placement Mapping

We begin by identifying the lowest point in your basement where water tends to accumulate. A technician maps the optimal sump pit location and determines the safest discharge route based on your home’s layout and grading.

Step 2: Excavation of Sump Pit

Our team cuts into the concrete floor and excavates a sump pit deep enough to match your local water table and drainage needs. The pit depth is calibrated to allow consistent water collection and pump activation.

Step 3: Pump Unit Setup & Drain Line Routing

A submersible or pedestal pump is installed securely in the pit. We then route the discharge line through an exterior wall or foundation opening toward a safe drainage point away from the home.

Step 4: Check Valve & Power Connection

A check valve is added above the pump to prevent water from flowing back into the pit after discharge. The system is connected to a dedicated power outlet or hardwired, with battery backup installed if needed.

Step 5: Testing and Backflow Prevention

We fill the sump pit with water to initiate pump cycling. The system is tested for float switch activation, discharge speed, and check valve response to ensure full operational performance.

Step 6: Surface Restoration

Once testing is complete, we re-concrete the area around the pit and clean the work zone. The surface is restored to a clean and level condition, ready for regular use.

Types of Sump Pumps We Install

‍

Aquaboss has delivered professional basement waterproofing services across multiple Toronto neighborhoods, including both interior and exterior applications. Our portfolio includes projects on poured concrete, block, and stone foundations with varying levels of water exposure and drainage complexity.

We apply code-compliant systems using tested materials such as waterproof membranes, weeping tiles, sump systems, and vapor barriers. All projects are completed by trained crews and documented for quality control and inspection compliance.

Aquaboss installs a full range of sump pump systems to match the layout, usage, and risk level of each property. Each pump type offers specific advantages depending on your basement configuration, flood exposure, and power reliability.

Submersible Sump Pumps

Submersible sump pumps are installed entirely inside the sump basin and operate underwater. They run quietly and are ideal for finished basements where both noise reduction and aesthetic discretion are important.

Pedestal Sump Pumps

Pedestal sump pumps have a motor positioned above the sump pit, while only the intake pipe extends into the basin. This design makes them easier to maintain and better suited for utility or unfinished basements.

Battery Backup Systems

We install deep-cycle battery backup systems that maintain sump pump operation during power outages. Each unit activates automatically when the main power source fails, ensuring uninterrupted drainage protection.

Water-Powered Backup Pumps

Water-powered backup pumps operate without electricity by using city water pressure to eject groundwater from the sump basin. These systems are ideal for homes that lack access to reliable battery maintenance or where power interruptions are frequent.

Why Aquaboss Is Toronto’s Trusted Sump Pump Installer

Aquaboss, a licensed basement waterproofing services provider in Toronto, has earned the trust of homeowners by delivering sump pump installations that are reliable, efficient, and fully compliant with local building codes. Every system we install is tailored to your property’s drainage needs, basement layout, and risk level.

Why choose Aquaboss:

Certified and insured technicians handle every step of the installation

24/7 response availability for urgent service calls and emergency installs

Warranty-backed systems for long-term performance assurance

Code-compliant materials and fittings used in every project

Experience with Toronto soil and weather patterns, including freeze-thaw effects and high water tables

We don’t just install pumps—we deliver a working system built to prevent water damage under the most demanding conditions.

Get Free Estimate

Backup Systems: What Happens If Power Goes Out?

‍

A sump pump is only effective if it can run during a storm—when power outages are most common. Aquaboss installs backup systems that keep your basement protected even when the grid fails.

Backup Options We Offer:

Battery Backup Pumps
These systems activate automatically when your main pump loses power.Each unit includes a deep-cycle battery, float switch, and charger.

Water-Powered Backup Pumps
For homes with consistent municipal water pressure, this backup requires no electricity or batteries. It uses water flow to eject sump basin water.

Alarm & Monitoring Systems
High-water alarms notify you if the water rises above normal thresholds. Some units can connect to smart home systems or phone alerts.

Signs You May Need a New Sump Pump Installed

A sump pump is a reactive system. If it fails, water will remain in your basement.
Homeowners in Toronto often don’t realize the pump is malfunctioning until it’s too late.

We recommend installation or replacement when any of the following signs appear:

Standing water around your basement walls or sump pit
Musty odors or signs of mold near drains or corners
Visible rust or corrosion on the pump casing
Loud noises during pump cycles, especially grinding or rattling
System failure after a power outage due to missing backup
Unit older than 7 years, especially with no maintenance history
No existing pump in homes with known water entry problems

‍

Sump Pump vs French Drain vs Waterproofing: What’s the Difference?

Each system plays a different role in protecting your basement from water intrusion. At Aquaboss, we help you choose the right combination depending on your home's risk level, layout, and type of water issue.

Sump Pump: Removes water that has already collected in the sump basin. It’s an active system that relies on a float switch to pump water outside.
French Drain: Redirects sub-surface water through a gravel trench and perforated pipe, guiding it into a sump basin or exterior outlet before it can accumulate.
Waterproofing: Prevents water from penetrating foundation walls using membranes, sealants, and coatings. It’s a barrier method for proactive protection.

These systems are often combined to create full protection:

French drain catches sub-surface moisture
Waterproofing blocks wall entry
Sump pump handles any remaining groundwater inside

How Much Does Sump Pump Installation Cost in Toronto?

The cost to install a sump pump in Toronto typically ranges from $550 to $3,200, depending on system type, pit depth, and discharge complexity. Homes without a pre-existing pit or needing backup systems will be on the higher end of the range.

‍

Key Cost Factors: Pump Type, Excavation, Drain Connection

Pump type — Submersible units are more expensive than pedestal models
Excavation requirements — Digging and cutting concrete add labor
Drain routing — Long discharge paths or vertical lifts increase cost
Backup units — Battery or water-powered systems add to the base price
Electrical work — GFCI outlet or panel upgrades may be required

‍

What’s Included in Our Pricing?

AquaBoss provides a complete, transparent service package designed to cover every phase of your drainage system installation. Each quote includes both parts and labor, with no hidden fees or unexpected add-ons.

All services are delivered by a certified waterproofing technician with experience in drainage and foundation systems.

Our standard package includes:

On-site assessment and a tailored installation plan
Sump basin and pump unit
Check valve, discharge line, and all fittings
Electrical hookup or battery backup, as needed
Full cycle testing of the system
Surface restoration after trenching
System warranty and final documentation

This bundled approach ensures that your entire installation is handled professionally, from planning to restoration.

‍

Book a Free On-Site Estimate

Before any work begins, we conduct a free visit to inspect the basement, check elevation points, and confirm discharge routes. You'll receive a fixed quote tailored to your home’s drainage needs.

Book Your Free Sump Pump Quote and Moisture Assessment

If your basement shows signs of moisture, pooling water, or lacks an active sump system, Aquaboss will inspect the issue and provide a tailored installation plan—at no cost.

During your on-site visit, we will:

Inspect the lowest drainage points of your basement
Identify moisture entry locations and confirm discharge options
Measure depth and layout for sump pit placement
Determine whether a primary, backup, or combination system is best for your home

You’ll receive a clear quote including equipment type, discharge path, backup options, and expected timeline.

Get Free Estimate

Sump Pump Installation Services in Toronto

Sump Pump Installation Services in Toronto